Ricoh SAVIN D0AP Service Manual page 385

ROM/NEW
ROM: Display installed module number (upper row)/ version information (lower row).
NEW: Display module number (upper row)/ version information (lower row) on the SD
card.
9.
Press the [Update]. The software will be updated.
10. During the firmware update, a "firmware update/ verification progress screen" is displayed.
When the firmware update is complete, the "firmware update end screen" is displayed.
In the middle row, the name of the module currently being updated is displayed (in this
•
case, the printer module is being updated).
In the lower row, a progress bar is displayed in ten steps. (The more *, the more the
•
progress.)
The figures at the lower right of the display indicate "Number of updated items/ All items to
be updated".
SM
Firmware Update by SD Card
Contents
5-11 D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1