Discharge Plate - Ricoh SAVIN D0AP Service Manual

3.
Remove the image transfer roller [A].
Attach the image transfer roller with the black ring on the left end and the white ring on the
right end. Place the transfer roller on the bearing of the guide plate pulled out in Step 2, and
then gently push the guide plate down.

4.13.2 DISCHARGE PLATE

To Remove the Discharge Plate
1.
Remove the PCDU. (PCDU)
2.
Remove the image transfer roller.
3.
Slide the discharge plate [A] to the right to remove it.
To Install the Discharge Plate
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
(Image Transfer Roller)
4-90
Image Transfer
SM