Ricoh SAVIN D0AP Service Manual page 384

out of the slot.
5.
Turn the power on.
6.
Wait until the update screen starts (about 45 seconds).
When it appears, "Please Wait" is displayed.
7.
Check whether a program installation screen is displayed. (The screen is always in English,
regardless of the machine's language settings.) When the SD card contains two or more
software modules, they are displayed as follows.
When the SD card contains both a firmware package and one or more modules, the
following display may show up. Select the [Module] and touch [OK] to move above.
If you want to update the package firmware, refer to "Package Firmware Update (MF Model
Only) >
Update via SD
8.
Select the modules you want to update. The selected module is highlighted, and [Update]
are displayed.
Depending on the combination of modules to update, it may not be possible to
•
select all of them simultaneously.
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
card."
5-10
Firmware Update by SD Card
SM