NFC Card Reader Type M27 (M502-10)
5.
At the back of the SPDF, slide the small cover [A] up and remove it.
6.
If the thickness of the NFC card reader is 15.4 mm or less, set cushion [A] into the hole on
the SPDF bottom cover. (The cushion is provided as an accessory with this option.)
7.
Attach the double-sided tapes [A] on the bottom of the SPDF beside the projection [B] as
shown.
8.
Peel the double-sided tapes [A].
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
2-54
SM