Paper Exit/ Duplex; Paper Exit Full Sensor (S10); Paper Exit/Reverse Sensor (S1) - Ricoh SAVIN D0AP Service Manual

4.16 PAPER EXIT/ DUPLEX

4.16.1 PAPER EXIT FULL SENSOR (S10)

1.
Remove the upper cover.
2.
Remove the Paper exit full sensor (S10) [A].

4.16.2 PAPER EXIT/REVERSE SENSOR (S1)

1.
Remove the rear cover.
2.
Remove the harness cover [A] and release the harness.
There are four hooks inside the harness cover. Before removing the harness cover, check
the locations of the hooks in the photo below.
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
(Upper Cover (Printer),
(Rear Cover (Printer),
4-118
Upper Cover (MF))
Rear Cover (MF))
Paper Exit/ Duplex
SM