Table of Contents
Advertisement
2.3.2 IMPORTANT NOTICE ON SECURITY ISSUES
In order to increase the security of the machine, and to ensure that the customer sets the
administrator password, an administrator set/change prompt screen is displayed at the first
power-up.
For more details about this security issue, see "Notes for Using This Machine Safely" supplied
with the machine.
2.3.3 INSTALLATION PROCEDURE
Condensation may form inside the machine when it is moved from a cold location to a warm
location. Using the machine while condensation exists may cause a malfunction.
If condensation has formed, do not immediately turn on the power. Leave the machine, without
turning it on, in the location where it will be used for at least two hours. You can use the machine
when the room temperature and the temperature inside the machine are nearly the same.
If SC548 or the message for condensation appears on the control panel when you turn on the
machine's power, turn off the power and wait for the condensation to evaporate.
Removal of Packing Materials and Shipping Retainers
1.
Hold the inset grips on both sides of the machine with two people as shown below, and
slowly lift and move the machine.
2.
Lower the machine slowly when positioning it.
Do not put anything in the space around the machine, so that you can load paper, replace
consumables, and clear paper jams easily.
SM
Main Machine Installation (IM 350F/350/430F)
2-13
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Advertisement
Chapters
Table of Contents
Troubleshooting
