Ricoh SAVIN D0AP Service Manual page 78

Offline Stapler Type M34 (D3EP-02)
1.
By using a coin, open the cover on the right side of the machine.
2.
Fold outside the parts of the release paper that are not stuck to the double-sided tapes on
the back of the staple unit cradle.
The adhesion of the release paper is strong, so it cannot be detached once it is affixed. Do
not affix the release paper until Step 6.
3.
Align the hole on the staple unit cradle to the bump that is on the right side of the machine,
and then insert the screw into the screw hole.
If the right side of the machine is dirty, clean the surface before mounting the staple unit
cradle on the machine.
4.
Align the lines of both the machine and the staple unit cradle as shown in the illustration,
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1 2-40 SM