Machine Installation - Ricoh Gestetner LANIER SAVIN G071 Service Manual

1.2 MACHINE INSTALLATION

Refer to the Operating Instructions for details.
If the customer has a service contract, change the settings of the following SP
modes depending on the contract type.
Item SP No.
Meter charge SP5-930-1
(Meter_
Charge)
Counting method SP5-045-1
(Counter
Method)
A3/11" x 17" SP5-104-1
double counting (Double
PM warning SP5-931-1
display 1 (PM_Display
– Charger)
PM warning SP5-931-2
display 2 (PM_Display
– PCU)
SM
CÓPIA NÃO CONTROLADA
Specifies whether the meter charge
mode is enabled or disabled.
If the user is doing the user PM
procedures, set meter charge to 'Off'.
If the technician is doing all the PM,
set meter charge to 'On'.
Meter charge mode enabled:
•
The Counter menu appears
immediately after the Menu key is
pressed.
•
The counter type selected by the
counting method (SP5-045-1,
Counter Method) can be displayed
with the Counter menu.
•
The counter values can also be
printed with the Counter menu.
•
The selected counter starts from a
negative number.
Meter charge mode disabled:
• The Counter menu is not
displayed.
•
The total counter starts from 0.
Specifies whether the counting
method used in meter charge mode is
based on developments or prints.
Important:
This SP can only be done before the
negative counters are reset with SP7-
825-001 (Counter Reset)
Specifies whether the counter is
doubled for A3/11" x 17" paper.
Count)
Specifies whether the PM warning for
the charge corona unit is displayed
when the replacement time arrives.
1: Displayed
0: Not displayed
Specifies whether the PM warning for
the PCU is displayed.
1: Displayed
0: Not displayed
1-3
CÓPIA NÃO CONTROLADA
MACHINE INSTALLATION
Function Default
Off
Developments
No: Single
counting
1
1
G071