Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 80

Parameter setting procedure
The following shows the procedure to set module parameters of the safety remote I/O module from the "Network
Configuration Settings" window.
When the user authentication function of the CPU module is enabled, perform the logon of the user
authentication function in advance. For the user authentication function, refer to the following.
Page 109 User Authentication Function
Operating procedure
1.
Display the "CC IE Field Configuration" window.
[Navigation window]  [Parameter]  [Module Information]  Model name  [Basic Settings] 
[Network Configuration Settings]  "CC IE Field Configuration" window
2.
Display the "Parameter Processing of Device Station" window.
Select the target main module.  [CC IE Field Configuration]  [Online]  [Parameter Processing of Device Station]
7 VARIOUS SETTINGS
78
7.2 Parameter Settings