Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 179

Output Y OFF information clear request
■Device No.
Name
Output Y OFF information clear request
■Description
This remote register area is used to clear Output Y OFF information (RWr1F).
Clear processing continues while the bit of Output Y OFF information clear request (RWw1F) is on.
b15 b14 b13 b12
YF YE YD YC
Off: Output Y OFF information is not cleared.
On: Output Y OFF information is cleared.
For the timing of turning on and off the remote register, refer to the following.
ON
Remote output signal RY0
ON
External output signal Y0
Output Y OFF information Y0
OFF
(RWr1F.b0)
Output Y OFF information
OFF
clear request Y0 (RWw1F.b0)
(1) Remains on even after Y0 turns on.
(2) Turns off when the clear request turns on.
Controlled by the safety remote I/O module
Controlled by the program
b11 b10 b9 b8
YB YA Y9 Y8
ON
OFF
ON
OFF OFF
ON
(1)
Device No.
RWw1F
b7 b6 b5 b4
Y7 Y6 Y5 Y4
ON
b3 b2 b1 b0
Y3 Y2 Y1 Y0
(2)
OFF
OFF
APPX
Appendix 3 Remote Register
A
177