Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 29

NZ2GFSS2-8TE-S1 type main output module
Item
CC-Link IE station type
Number of output points
Rated load voltage
Maximum load current
Isolation method
Max. inrush current
*5
Leakage current at OFF
Maximum voltage drop at ON
OFF  ON
Output circuit response time
ON  OFF
Safety remote station refresh response processing time
Output response time of safety remote station
Surge suppressor
External power supply for Voltage
*2
output part
Current
Protection function
Output type
Withstand voltage
Isolation resistance
Noise immunity
Protection degree
Wiring method for common
Protection function
External interface Communication part
Module power supply part
Output part, external power
supply part
Applicable DIN rail
Applicable wire size Terminal block for module
power supply and FG
I/O terminal block
Applicable solderless terminal Terminal block for module
power supply and FG
I/O terminal block
Cyclic transmission RX/RY points
RWr/RWw points
SA\X/SA\Y points
Applicable safety protocol version
Communication cable
Availability of connecting extension module
*2*4
Module power supply Voltage
Current
Protection function
Fuse
Safety element
Weight
NZ2GFSS2-8TE-S1
Remote device station
Single wiring: 8 points, double wiring: 4 points
24VDC (ripple ratio: 5% or less) (allowable voltage range: 20.4 to 28.8VDC)
0.5A/point
Photocoupler isolation
1.0A, 10ms or less
0.1mA or lower
0.5VDC (TYP.) 0.5A, 0.8VDC (MAX.) 0.5A
0.4ms or less (24VDC)
0.4ms or less (24VDC)
2.0ms
Output circuit response time
Zener diode
24VDC (ripple ratio: 5% or less) (allowable voltage range: 20.4 to 28.8VDC)
70mA
External power supply overvoltage protection function, external power supply overcurrent
protection function
Source + Source type
500VAC for 1 minute between all DC external terminals and the ground
10M or higher between all DC external terminals and ground (500VDC isolation resistance
tester)
Noise voltage 500Vp-p, noise width 1s, noise frequency 25 to 60Hz (DC type noise simulator
condition)
IP2X
Output 8 points/common (2-piece spring clamp terminal block)
Output overload protection function
RJ45 connector
Terminal block for module power supply and FG (2-piece spring clamp terminal block)
40 points, 2-piece spring clamp terminal block (push-in)
TH35-7.5Fe, TH35-7.5A (compliant with JIS C 2812/IEC 60715)
Core: 0.3 to 1.5 (22 to 16 AWG)
Core: 0.3 to 1.5 (22 to 16 AWG)
Page 59 List of bar solderless terminals
*1
Page 65 List of bar solderless terminals
80 points
32 points
32 points
2 (fixed)
An Ethernet cable that meets the 1000BASE-T standard: Category 5e or higher (double
shielded, STP), straight cable
Connectable
24VDC (ripple ratio: 5% or less) (allowable voltage range: 20.4 to 28.8VDC)
*3
160mA
Module power supply overvoltage protection function, module power supply overcurrent
protection function
1.6A (user-unchangeable)
Type B, HFT = 1, SC 3
0.25kg
3 SPECIFICATIONS
3.2 Performance Specifications
3
27