Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 192

■Number of pulse output for output dark test
Set the number of pulse output for output dark test.
Address Name
(hexadecimal)
01B0H to 01B7H Number of pulse output for output dark test
When "0: Not used" is selected in the wiring selection of output, or "1: Do not perform" is selected in the output
dark test execution setting, this parameter will be ignored.
■Number of ON times integration function enable
Set the number of ON times integration function enable.
Address Name
(hexadecimal)
01C0H Number of ON times integration function enable
b15 b14 b13
0 (fixed)
When "0: Not used" is selected in the wiring selection of output, this parameter will be ignored.
■Extension module identification code
Set the identification code for specifying the extension module type of the NZ2GFSS2-8D-S1, NZ2GFSS2-8TE-S1, or
NZ2GFSS2-16DTE-S1.
Address Name
(hexadecimal)
0200H Extension module identification code
b15 b14 b13
Module type
00H: Extension module not connected
01H: Digital input module
02H: Digital output module
The NZ2EXSS2-8TE cannot be connected to the NZ2GFSS2-8D-S1, NZ2GFSS2-8TE-S1, or NZ2GFSS2-
16DTE-S1.
APPX
190
Appendix 4 Remote Buffer Memory
b12 b11 b10 b9
b12 b11 b10 b9
Setting range
0: 1 time
1: 2 times
2: 3 times
Setting range
0: Disable
1: Enable
b8 b7 b6 b5
Y7 Y6 Y5
Setting range
000H: Extension module not connected
0101H: 16-points digital input module
0201H: 16-points digital output module
b8 b7 b6 b5
Points
01H: 16 points
Default value
0000H
Default value
0000H
b4 b3 b2 b1
Y4 Y3 Y2 Y1
Default value
0000H
b4 b3 b2 b1
b0
Y0
b0