Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 18

Extension module
■NZ2EXSS2-8TE
(9)
No. Name
(1) PW LED
RUN LED
MODE LED
D LINK LED
SAFETY LED
ERR. LED
(2) I/O LED
(3) Station number setting switch
(4) Terminal block for module
power supply and FG
2 PART NAMES
16
(2)
(6)
(10) (7)
Description
Indicates the power supply status.
On: Power supply ON
Off: Power supply OFF
Indicates the operating status.
On: Operating normally, in initial processing
Off: A major error has occurred.
Indicates the mode status.
On: In online mode, in initial processing
Flashing: In unit test mode
Off: The unit test is completed.
Indicates the data link status.
On: Data link (cyclic transmission being performed), in initial processing
Flashing: Data link (cyclic transmission stopped)
Off: Data link not in operation (disconnected)
Indicates the safety communication connection status.
On: In safety communication connection, in initial processing
Flashing: Checking the position of the setting target module
Off: Safety communication being disconnected
Indicates the error status.
On: An error has occurred, in initial processing
Flashing: A minor error has occurred.
Off: Operating normally.
NZ2GFSS2-32D-S1, I/O LED (X)
NZ2EXSS2-8TE
I/O LED (Y)
NZ2GFSS2-8D-S1, When error points are not
NZ2GFSS2-8TE-S1, indicated
NZ2GFSS2-16DTE-S1
When error points are indicated
A rotary switch for the following setting and test.
• Station number setting ( Page 48 Setting of Network Number and Station Number)
• Unit test ( Page 126 Unit Test)
When operating the station number setting switch, use a flathead screwdriver with 3.5mm or less width of the tip.
A terminal block to connect the module power supply (24VDC) and FG.
*1
*2
Indicates the ON/OFF status of the inputs.
On: Input ON
Off: Input OFF
Indicates the ON/OFF status of the outputs.
On: Output ON
Off: Output OFF
Indicates the ON/OFF status of I/O.
On: ON status of input or output
Off: OFF status of input or output
Flashes the error points.
On: ON status of input or output
Flashing: An error has occurred.
Off: OFF status of input or output
*3
*3
*4