Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 187

■Input response time setting [extension I/O setting]
Set the input response time of the extension I/O.
Address Name
(hexadecimal)
0003H Input response time setting
This setting is for the standard extension module and unavailable for the main module. For the main module,
set Input response time [main module] (address: 0120H to 0127H).
For details on the input response time setting value of the standard extension module, refer to the following.
 CC-Link IE Field Network Remote I/O Module User's Manual
■Output HOLD/CLEAR setting [extension I/O setting]
Set whether to hold (HOLD) or clear (CLEAR) the last output status of the extension module when the standard
communications are disconnected or the CPU module is switched to the STOP state.
Address Name
(hexadecimal)
0004H Output HOLD/CLEAR setting
For details on the output HOLD/CLEAR setting value of the standard extension module, refer to the following.
 CC-Link IE Field Network Remote I/O Module User's Manual
■Operation setting of external power supply voltage error detection
Set the operation to be performed at the detection of external power supply voltage error.
Address Name
(hexadecimal)
0101H Operation setting of external power supply voltage error detection
Setting range
0: 0ms
1: 0.2ms
2: 1.0ms
3: 1.5ms
4: 5ms
5: 10ms
6: 20ms
7: 70ms
Setting range
0: Clear
1: Hold
Setting range
0: Stop safety communication
1: Continue safety communication (Without
output interlock)
2: Continue safety communication (With output
interlock)
Appendix 4 Remote Buffer Memory
Default value
0005H
Default value
0000H
A
Default value
0
APPX
185