Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 113

Stop safety communication
■Output interlock
After an external power supply voltage error is detected, safety communications stop and the outputs are interlocked.
Ex.
For the NZ2GFSS2-32D-S1
Module operation mode
Status of the external power
supply
External power supply status
(SA\X2D)
Safety output control READY
(SA\X2E)
Test pulse output terminal
(T0 to T3)
Output signal
(Y…/Y…+1)
Controlled by the safety remote I/O module
*1 An external power supply voltage error has not occurred.
*2 An external power supply voltage error has occurred.
Standby mode Safety operation mode
*1
Normal
ON
OFF
ON
OFF
ON
OFF
ON
OFF
8.7 Operation Setting Function at Detection of External Power Supply Voltage Error
Moderate error state
*2
Error
OFF
OFF
OFF
OFF
8
8 FUNCTIONS
111