Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 57

DIN rail
stopper
DIN rail
stopper
Do not slide the module from the edge of the DIN rail when mounting it. Doing so may damage the module.
Hitch the hook to
top of the DIN rail
DIN rail
stopper
6.
Hitch the upper hook of the DIN rail stopper to the top of
the DIN rail.
7.
Slide the DIN rail stopper up to the left side of the
module.
8.
Hold the DIN rail stopper in the direction opposite to the
arrow on the stopper and tighten the screw with a
screwdriver.
9.
Install the DIN rail stopper on the right side of the
module in the same procedure. Install the stopper
upside down for the right side.
6 INSTALLATION AND WIRING
6
55
6.3 Installation