Mounting The Module On A Din Rail - Mitsubishi Electric NZ2GFSS2 32D S1 User Manual

Mounting the module on a DIN rail

The following procedure is just an example of fixing the module with a DIN rail stopper. When fixing the
module, refer to the manual of the DIN rail stopper used.
Installation procedure
Hitch the hook to
bottom of the DIN rail
6 INSTALLATION AND WIRING
54
6.3 Installation
Hook
Hook
1.
Pull down all DIN rail hooks on the back of the module.
The hooks should be pulled down until they click.
2.
Hang the upper tabs of the module on a DIN rail, and
push the module in position.
3.
Lock the DIN rail hooks to the DIN rail to secure the
module in position. Push each hook up until it clicks. If
the hooks are beyond the reach, use a tool such as a
screwdriver.
4.
Loosen the screw on DIN rail stopper.
5.
Hitch the bottom hook of the DIN rail stopper to the
bottom of the DIN rail. Hitch the hook according to the
orientation of the arrow on the front of the stopper.