Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 178

Output Y OFF information
■Device No.
Name
Output Y OFF information
■Description
Whether output Y has been turned off or not can be checked with Output Y OFF information (RWr1F).
The amount of time delay from when Output Y OFF information (RWr1F) changes until the external output accordingly
changes is not more than output response time.
b15 b14 b13
YF YE YD
Off: Output Y has never been turned off.
On: Output Y has been turned off.
Output Y OFF information (RWr1F) can be cleared by using Output Y OFF information clear request
(RWw1F).
Output Y ON information clear request
■Device No.
Name
Output Y ON information clear request
■Description
This remote register area is used to clear Output Y ON information (RWr1C).
Clear processing continues while the bit of Output Y ON information clear request (RWw1C) is on.
b15 b14 b13
YF YE YD
Off: Output Y ON information is not cleared.
On: Output Y ON information is cleared.
For the timing of turning on and off the remote register, refer to the following.
Remote output signal RY0
External output signal Y0
Output Y ON information Y0
(RWr1C.b0)
Output Y ON information
clear request Y0 (RWw1C.b0)
(1) Remains on even after Y0 turns off.
(2) Turns off when the clear request turns on.
Controlled by the safety remote I/O module
Controlled by the program
APPX
176
Appendix 3 Remote Register
b12 b11 b10 b9
YC YB YA Y9
b12 b11 b10 b9
YC YB YA Y9
ON
OFF OFF
ON
OFF
ON
OFF
(1)
OFF
Device No.
RWr1F
b8 b7 b6 b5
Y8 Y7 Y6 Y5
Device No.
RWw1C
b8 b7 b6 b5
Y8 Y7 Y6 Y5
OFF
b4 b3 b2 b1
Y4 Y3 Y2 Y1
b4 b3 b2 b1
Y4 Y3 Y2 Y1
(2)
OFF
ON
OFF
b0
Y0
b0
Y0