Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 136

Checking with "Command Execution of Device Station"
The following describes how to check errors with "Command Execution of Device Station" in the "Network Configuration
Settings".
1.
Select the safety remote I/O module in "List of stations" on the "CC IE Field Configuration" window.
2.
Open the "Command Execution of Device Station" window.
[CC IE Field Configuration]  [Online]  [Command Execution of Device Station]
3.
Set "Method selection" to "Error history read" and click the [Execute] button.
4.
Click the [Execute] button and a confirmation window is displayed. Check the contents and click the [Yes] button to read
the error history data.
5.
When the following window is displayed, click the [OK] button.
6.
The error history of the safety remote I/O module is displayed in "Execution Result".
10 TROUBLESHOOTING
134
10.6 How to Check Error Codes