Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 155

■Input dark test error (error code: 0205H)
The diagnostic result of an input dark test (normal or error) is stored in Error code details 1. This error occurs only for the
NZ2GFSS2-8D-S1 and the NZ2GFSS2-16DTE-S1.
• Error code details 1
b15 b14 b13 b12
0 (fixed)
0: Normal
1: Error
■Parameter data error (error code: 05H)
The remote buffer memory start address (16-bits) of the parameter where an error was detected is stored in Error code details
1.
The value written in the corresponding address (16-bits) is stored in Error code details 2.
For the parameter with a 32-bits setting value, the value written in the corresponding address (lower 16-bits) is stored in Error
code details 2 and the value (upper 16-bits) is stored in Error code details 3.
For details on the remote buffer memory addresses, refer to the following.
Page 178 Remote Buffer Memory
b11 b10 b9 b8 b7 b6 b5 b4
X7 X6 X5 X4
b3 b2 b1 b0
X3 X2 X1 X0
10 TROUBLESHOOTING
153
10.7 List of Error Codes
10