Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 185

■Module control data area
Address Name
(hexadecimal)
1000H Error history clear command
1001H Error history clear completed
1002H Parameter area initialization command
1003H Parameter area initialization completed
1004H Use prohibited
1005H Safety module enabled flag
1006H to 10FFH Use prohibited
*3
1100H Number of ON times integration value clear command Y0 to YF
*3
1101H Number of ON times integration value clear completed Y0 to YF
1102H to 11FFH Use prohibited
1200H to 12FFH For extension module
*1 This is the value for when the module power supply is turned off and on or at the remote reset.
*2 This column indicates whether reading or writing values using programs is possible.
R: Readable
W: Writable
*3 For the NZ2GFSS2-8D-S1, this address cannot be used.
For the monitoring area of the standard extension module, refer to the following.
 CC-Link IE Field Network Remote I/O Module User's Manual
*1
Default value Read/Write
0000H R/W
0000H R
0000H R/W
0000H R
 
0000H R
 
0000H R/W
0000H R
 
 
APPX
Appendix 4 Remote Buffer Memory
*2
A
183