Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 61

List of bar solderless terminals
When using a bar solderless terminal, the products listed below are recommended. For a processing method of the cable
terminal, such as the stripping length of the cable, follow the specifications of the terminal used. Use UL listed bar solderless
terminals, and for processing, use a tool recommended by manufacturers of solderless terminals.
■For the NZ2GFSS2-32D-S1
Terminal shape
Ferrule (with insulation sleeve)
*1 When using the safety remote I/O module as a UL listed product, use the terminals whose model name ends with -10 or -10.
*2 This model is not a UL listed product.
■For the NZ2GFSS2-8D-S1, NZ2GFSS2-8TE-S1, or NZ2GFSS2-16DTE-S1
Terminal shape
Ferrule (with insulation sleeve)
*1 When using the safety remote I/O module as a UL listed product, use the terminals whose model name ends with -10 or -10.
*1
Model Applicable wire
size
AI 0.5-10WH 0.5 (20 AWG)
AI 0.75-10GY 0.75 (18 AWG)
AI 1-10RD 1.0 (18 AWG)
AI 1.5-10BK 1.5 (16 AWG)
*2
AI 2.5-10BU 2.0 (14 AWG)
*1
Model Applicable wire
size
AI 0.34-8TQ 0.34 (22 AWG)
AI 0.5-8WH 0.5 (20 AWG)
AI 0.5-10WH 0.5 (20 AWG)
AI 0.75-8GY 0.75 (18 AWG)
AI 0.75-10GY 0.75 (18 AWG)
AI 1-8RD 1.0 (18 AWG)
AI 1-10RD 1.0 (18 AWG)
AI 1.5-8BK 1.5 (16 AWG)
AI 1.5-10BK 1.5 (16 AWG)
Bar solderless Contact
terminal tool
CRIMPFOX6 PHOENIX CONTACT GmbH & Co. KG
Bar solderless Contact
terminal tool
CRIMPFOX6 PHOENIX CONTACT GmbH & Co. KG
6 INSTALLATION AND WIRING
6
59
6.4 Wiring