■NZ2GFSS2-8D-S1, NZ2GFSS2-8TE-S1, NZ2GFSS2-16DTE-S1
(2)
Release
6 INSTALLATION AND WIRING
52
6.3 Installation
(1)
3.
Insert the connector of the extension module into that of
the main module so that they are securely engaged. Do
not tilt the extension module when inserting the
connector.
4.
Lock the module joint levers (four points) on the side of
the extension module. Slide the levers toward the
module. Check that the extension module is securely
connected after locking the levers.
1.
(1) Put your thumb on the mark located on the upper
right of the cover on the side of the module. (2) Apply
force to the direction indicated by the mark and remove
the cover. Do not dispose of the removed cover, but
store it. Do not attach covers of other models because
they are not compatible.
2.
Release the module joint levers (two points) on the side
of the extension module. Slide the levers to the outside
of the module.
3.
Insert the connector of the extension module into that of
the main module so that they are securely engaged. Do
not tilt the extension module when inserting the
connector.