Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 19

No. Name
(5) Ethernet port (P1)
L ER LED
LINK LED
Ethernet port (P2)
L ER LED
LINK LED
(6) I/O terminal block
(7) DIN rail hook
(8) Extension connector cover
(9) Extension connector
(10) Connecting hook
(11) I/O PW
*1 When cyclic transmission is stopped only for the master station, the safety remote I/O module maintains the cyclic transmission. Thus,
the D LINK LED turns on.
*2 After a minor error has been eliminated, the LED flashes for 5 seconds or longer and turns off.
*3 In the safety operation mode, the status of actual input signals that are externally input is indicated on the LEDs regardless of the setting
of the input response time setting function.
For details on the safety operation mode, refer to the following.
Page 42 Operation mode and state transition
*4 When the LED is flashing, the minor state is applied to the module.
For I/O LED indication setting at error occurrence, refer to the following.
Page 42 Operation mode and state transition
Description
PORT1 connector for CC-Link IE Field Network (RJ45 connector)
Connect an Ethernet cable. For the wiring method and wiring precautions, refer to the following.
Page 60 Wiring of Ethernet cable
Indicates the port status.
On: Abnormal data was received or loopback is being performed.
Off: Normal data was received and loopback is not performed.
Indicates the link status.
On: Link-up in progress
Off: Link-down in progress
PORT2 connector for CC-Link IE Field Network (RJ45 connector)
Connect an Ethernet cable. For the wiring method and wiring precautions, refer to the following.
Page 60 Wiring of Ethernet cable
(Same as the P1 connector)
A 2-piece screw spring clamp terminal block to wire the I/O power supply and safety remote I/O signals.
For the pin layout, refer to the following.
Page 20 Performance Specifications
A hook to mount a module on a DIN rail.
A cover to protect a connector for extension module connection.
A connector to mount an extension module to the main module.
A fixing hook for connecting the main module and the extension module.
Indicates the status of the power supply from the external power supply.
On: External power supply ON
Off: External power supply OFF
2
2 PART NAMES
17