Mitsubishi Electric NZ2GFSS2 32D S1 User Manual page 7

[Startup and Maintenance Precautions]
WARNING
● Do not touch any terminal while power is on. Doing so will cause electric shock or malfunction.
● Shut off the external power supply (IO power) used in the system in all phases before cleaning the
module or retightening the terminal block mounting screw. Failure to do so may result in electric
shock. Tighten the terminal block mounting screws within the specified torque range. Undertightening
can cause short circuit, fire, or malfunction. Overtightening can damage the screw and/or module,
resulting in drop, short circuit, or malfunction.
[Startup and Maintenance Precautions]
CAUTION
● Do not disassemble or modify the modules. Doing so may cause failure, malfunction, injury, or a fire.
● Use any radio communication device such as a cellular phone or PHS (Personal Handy-phone
System) more than 25cm away in all directions from the module. Failure to do so may cause
malfunction.
● Shut off the external power supply (IO power) used in the system in all phases before mounting or
removing the module. Failure to do so may cause the module to fail or malfunction.
● Before handling the module, touch a conducting object such as a grounded metal to discharge the
static electricity from the human body. Failure to do so may cause the module to fail or malfunction.
● Do not drop or apply strong shock to the module. Doing so may damage the module.
● Shut off the external power supply (IO power) used in the system in all phases before installing or
removing a module in/from the control panel. Failure to do so may cause the module to fail or
malfunction.
● Check the module once a day, by turning on output signals and confirming that no error occurs.
[Disposal Precautions]
CAUTION
● When disposing of this product, treat it as industrial waste.
[Transportation Precautions]
CAUTION
● When transporting lithium batteries, follow the transportation regulations. For details on the regulated
models, refer to the MELSEC iQ-R Module Configuration Manual.
● The halogens (such as fluorine, chlorine, bromine, and iodine), which are contained in a fumigant
used for disinfection and pest control of wood packaging materials, may cause failure of the product.
Prevent the entry of fumigant residues into the product or consider other methods (such as heat
treatment) instead of fumigation. The disinfection and pest control measures must be applied to
unprocessed raw wood.
5