Advertisement
Engine
g402342
1.
Operator cushion assembly
2.
Hydraulic fluid filter assembly
Removing the Engine
Field Pro® 6040
22267SL Rev A
3.
Engine assembly
4.
Oil drain valve
Refer to
Figure 15
for this procedure.
1. Disconnect the negative battery cable from the battery; refer to
and Installing the Battery (page
2. Remove the pump drive belt tensioner; refer to
Belt Tensioner (page
3. Remove the operator's cushion assembly from the machine.
4. Remove the air cleaner assembly; refer to
Cleaner (page
4–14).
5. Remove the hydraulic fluid cooler; refer to
Cooler (page
5–59).
6. Clean the area around the hydraulic hose and fitting connections then
disconnect or remove the hydraulic hoses from the hydraulic fluid filter. Cap
or plug the disconnected hydraulic hoses and fittings to prevent hydraulic
system contamination.
7. Remove the hydraulic fluid filter assembly from the machine.
Figure 15
6–29).
4–18).
Page 4–21
5.
Cap screw (4 used)
6.
Flange nut (4 used)
Removing
Removing the Pump Drive
Removing and Installing the Air
Removing the Hydraulic Fluid
Engine: Service and Repairs
Advertisement
Chapters
Troubleshooting
