Servicing The Control Valve - Toro Field Pro 6040 Service Manual

Servicing the Control Valve

g415105
1. Knob (3 each)
2. Lever (3 each)
3. Hex nut (3 each)
4. Elbow fitting
5. Plug (2 each)
Field Pro® 6040
22267SL Rev A
6. Straight fitting, 0.407 orifice (2 each) 11.
7. Elbow fitting
8. Straight fitting, 0.047 orifice
(optional, 2 each)
9. Cap
10. Diagnostic fitting
Individual repair components will be made available separately from your
Authorized Toro Distributor.
The ports on the control valve are marked for easy identification of components
and connections. Example: P is the pressure connection port from the gear
pump; refer to the hydraulic schematic in
function of the hydraulic lines at each port.
Figure 56
12.
13.
14.
15.
Appendix A (page A–1)
Page 5–77
Straight fitting
Check valve, 0.047 orifice
Check valve, 0.025 orifice
Elbow fitting
Control valve
to identify the
Hydraulic System: Service and Repairs