Operation; Starting The Engine; Using The Self-Propel Drive; Stopping The Engine - Toro 20041 Operator's Manual

Operation

Starting the Engine

1. Firmly push in
the primer 3 times
with your thumb,
holding the primer
in for a second
before releasing it
each time.
Note: If the air
temperature is
° °
below 55 F (13 C),
firmly push the
primer in 5 times.
2. Hold the blade
control bar (A)
against the handle.
3. Start the engine using either the ignition key or
the recoil starter.
or
m-5592a
4. If the mower does not start in 1 or 2 pulls (or
within 5 seconds using the electric starter), press the
primer button 1 or 2 times and try starting it again.
Note: If the mower still does not start, contact an
Authorized Service Dealer.
8

Using the Self-propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace
with you.
m-7311
A
m-5578

Stopping the Engine

To stop the engine, release the blade control bar.
Remove the ignition key when you leave the mower.
Important: When you release the blade control bar,
both the engine and blade should stop within
3 seconds. If they do not stop properly, stop using
your mower immediately and contact an Authorized
Service Dealer.
m-5606
3352-568 Rev A
m-5582
m-5613
m-5582