Toro Field Pro 6040 Service Manual page 64

Removing the Engine (continued)
Engine: Service and Repairs
8. Remove the fuel tank and evaporative canister; refer to
Tank (page 4–10) and
(page 4–12).
9. Disconnect the throttle and choke control cables from the engine.
g402341
1. Choke control cable
2. Choke cable clamp
3. Throttle stop screw
Note: Record the control cable routing, linkage connection, and clamp
location for assembly purpose.
10. Disconnect the engine electrical connections (front right corner of engine):
• the positive (+) battery cable and fusible link harness at the starter motor
stud
• the machine wire harness at the engine wire harness connector
• the negative (-) battery cable and wire harness ground connectors at the
engine crankcase
Note: Record wire routing and the location of any cable ties and clamps
removed for assembly purpose.
Disassembling the Fuel Evaporative Control System
Figure 16
4. Throttle cable clamp
5. Throttle control cable
Page 4–22
Removing the Fuel
Field Pro® 6040
22267SL Rev A