Toro Field Pro 6040 Service Manual page 30

Specifications and Maintenance: Special Tools
Hydraulic Hose Kit
K–Line Part No. TOR6007
This kit includes the fittings and hoses that
are used to connect high flow hydraulic
filter kit (TOR6011) to the machine
hydraulic traction system components.
Bidirectional High Flow Hydraulic Filter Kit
K–Line Part Number: TOR6011
The high flow hydraulic filter kit is designed with
large flow (150 L/minute or 40 gallons/minute) and
high pressure (344 bar or 5,000 psi) capabilities.
This kit provides for bidirectional filtration which
prevents unwanted material from entering into the
circuit regardless of the flow direction.
If a component failure occurs in the closed loop
traction circuit, contamination from the damaged
part will remain in the circuit until you remove it.
Install a high flow hydraulic-fluid filter into the circuit
when you connect the hydraulic test gauges in
order to test the traction circuit components or after
you replace a failed traction circuit component
(e.g., piston pump or wheel motor). This filter
removes contamination from the hydraulic fluid in
the traction circuit, thereby preventing additional
component damage.
The kit includes SAE O-ring base straight thread
to ORFS (O-ring face seal) fittings. Install SAE
straight thread O-ring base to BSP fittings when
using BSP hydraulic hoses. This kit does not
include any hydraulic hoses.
Note: The replacement filter element is K-Line
Part No. TOR6012. The filter element canister
tightening torque is 34 N·m (25 ft-lb).
Page 2–16 Field Pro® 6040
22267SL Rev A