Toro Field Pro 6040 Service Manual page 32

Dielectric Gel (continued)
Specifications and Maintenance: Special Tools
Toro Part No. 107-0342
Use the dielectric gel to prevent
corrosion of unsealed connection
terminals. To ensure complete
coating of the terminals, liberally
apply the gel to the component
and wire harness connector, plug
the connector into the component,
disconnect the connector, apply
the gel to both surfaces again, and
connect the harness connector
to the component again. The
connectors must be fully packed
with gel for effective results.
Note: Do not use the dielectric gel
on the sealed connection terminals
as the gel can unseat the connector
seals during assembly.
Page 2–18 Field Pro® 6040
22267SL Rev A