Toro Field Pro 6040 Service Manual page 202

Adjusting the Parking Brake Linkage (continued)
Chassis: Adjustments
D. Tighten the upper and lower jam nuts on the turnbuckle assembly.
5. The compression spring length (distance between the trunion pin and the
flange nut on the brake link) should be 90 mm (3.35 inch). If necessary, use
the flange nut to adjust the compression spring length.
6. Repeat steps 4 and
7. Test the parking brake operation before returning the machine to service.
5 on the remaining brake link.
Page 7–4 Field Pro® 6040
22267SL Rev A