Toro Field Pro 6040 Service Manual page 214

Installing the Mid-Mount Attachment Stop (continued)
Chassis: Service and Repairs
2. Secure the lower plate to the lift cylinder with the previously removed
fasteners.
3. Fit the stop plate to the top plate and secure the top plate to the lower plate
with the previously removed spacers and fasteners. Insert the stop pins in
the storage holes to align the assembly before tightening the fasteners.
4. Start the engine and fully extend the center lift cylinder. Ensure that a stop
pin fits properly in the transport stop hole of the mid-mount attachment stop.
5. Calibrate the mid-mount attachment stop assembly; refer to Calibrating the
Mid-Mount Attachment Stop in the traction unit Operator's Manual.
Page 7–16 Field Pro® 6040
22267SL Rev A