Toro Field Pro 6040 Service Manual page 100

Test Procedure (continued)
Hydraulic System: Testing the Hydraulic System
pump is worn and should be replaced or repaired; refer to
Pumps (page 5–61)
16. After testing:
A. Remove the hydraulic hoses and tester.
B. Install the hydraulic tube previously removed.
C. Remove the jack stands and lower the machine to the ground.
D. Check and adjust the level of the hydraulic fluid in the hydraulic reservoir;
refer to the traction unit Operator's Manual.
E. Start the engine and check for any hydraulic fluid leaks. Repair hydraulic
leaks if necessary before returning the machine to service.
or Servicing the Piston (Traction) Pumps (page
Page 5–34
Piston (Traction)
5–64).
Field Pro® 6040
22267SL Rev A