Service and Repairs
Wheels
Removing and Installing the Rear Wheels
g414445
1.
Wheel assembly
Field Pro® 6040
22267SL Rev A
1. Raise the rear of the machine; refer to
2. Loosen the lug nuts and remove the wheel assembly.
3. Install the rear wheel and tighten the lug nuts in an criss-cross pattern from
122 to 128 N·m (90 to 95 ft-lb).
4. Check and adjust the rear tire pressure before returning the machine to
service; refer to
Chassis Specifications (page
Figure 80
2.
Lug nut (5 each)
Jacking Instructions (page
Page 7–5
1–6).
2–4).
Chassis: Service and Repairs