Tools Required To Unpack And Prepare The Router For Installation - Juniper MX2010 Manual

Figure 5: Measurements of the Router Transport Kit Installed on the MX2010 (Front View)

Tools Required to Unpack and Prepare the Router for Installation

To unpack the router and prepare for installation, you may need the following tools and equipment:
NOTE: We recommend that you install the MX2010 by using a pallet jack with attachment or a
router transport kit.
• Router transport kit (model number MX2K-TRNSPRT-KIT)
• Standard pallet jack—48 in. (121.92 cm) deep x 27 in. (68.58 cm) wide.
8