Nortel DMS 100 Series Maintenance Manual page 320

8-32 RSC-M trouble isolation and correction
The CMR audit runs this audit at regular intervals. The facility audit that the
diagnostic normally uses for this purpose has a repetition time of 7.5 min. This
time is too low to provide adequate detection time for the NT6X78 circuit card.
A new audit was added for this feature.
Results of the CMR diagnostic test are logged as a PM181 audit exception
report. The PM181 audit exception report lists the failed card list and indicates
that CMR diagnostics detected the problem.
297-8223-550 Standard 04.02 November 2000