Nortel DMS 100 Series Maintenance Manual page 138

5-28 RSC-M alarm clearing procedures
PM RSC-M/RCO2
Major
(continued)
12
13
14
297-8223-550 Standard 04.02 November 2000
link_no
is the number of the link manually busied in step 10
If RTS
passes and alarm persists
passes and alarm clears
fails
To display any links that have faults, type
>TRKS;CARRIER;POST host_pm host_pm_no
and press the Enter key.
Sample response on the MAP display:
CLASS ML OS ALARM
TRUNKS 0 0 0
REMOTE 0 0 0
NO CLASS SITE RCC
0 TRUNKS BRSCS 0
1 REMOTE BRSCS 0
2 REMOTE BRSCS 0
Note: The MORE . . . at the bottom of the display indicates the user
can read more links. To read these links, type
>NEXT
and press the Enter key.
Perform the corrective procedure on the link that the MAP display in step 12
indicates.
Note: The system can indicate message links that have faults. These
links must be in the ManB state before the links can return to service
(RTS).
To test the ManB link, type
>TST link_no
and press the Enter key.
where
link_no
is the number of the ManB link. This link number is listed under the
NO column as shown in the MAP display in step 12. The
number for the ManB link in the example is1.
If TST
passes and alarms clears
Do
step 29
step 16
step 12
SYSB MANB UNEQ
0 0 0
5 0 0
CKT D ALARM SLIP FRAME
0 C 0 0
1 C 0 0
2 C 0 0
Do
step 15
OFFL CBSY PBSY
0 0 0
0 0 0
BER SES STATE
<–.7 0
<–.7 0
<–.7 0
MORE . . .
INSV
0
10
INSV
INSV
MANB