Nortel DMS 100 Series Maintenance Manual page 276

6-124 RSC-M card replacement procedures
NTRX43
in an RSC-M/MSP
11
At the front of the cabinet
12
13
14
15
16
297-8223-550 Standard 04.02 November 2000
(end)
Install the jumper connectors and cables removed in step 7 on the
replacement circuit card.
Replace the fuses removed in step 6.
Power up the circuit breaker that supplies the fuse module. Remove the
safety tag.
If fuses
do not blow
blow (protrude)
Go to the common returning a card procedure in this document.
This procedure is complete. Return to the maintenance procedure that
directed you to this card replacement procedure.
For additional help with this card replacement, contact the next level of
support.
Do
step 14
step 16