Ntrx41 In An Rsc-M/Msp - Nortel DMS 100 Series Maintenance Manual

6-100 RSC-M card replacement procedures
NTRX41
in an RSC-M/MSP
Application
Use this procedure to replace an NTRX41 card in a modular supervisory panel
(MSP) that supports a Remote Switching Center Multi-Access (RSC-M)
cabinet.
Note: In this section, examples refer to RSC-M as RCO2 . When software
outputs messages to the MAP terminal, software does not differentiate
between the two types of RCO2.
PEC
NTRX41
Common procedures
The common returning a card procedure is referenced in this procedure.
Action
This card replacement procedure contains a summary flowchart and a list of
steps. Use the flowchart to review the procedure. Follow the steps to perform
the procedure.
297-8223-550 Standard 04.02 November 2000
Suffixes Name
AA, BA, Alarm module
CA