Nortel DMS 100 Series Maintenance Manual page 283

At the rear panel of the cabinet
12 Locate the replaced circuit card. Attach the power connectors. Step 6
describes how to attach the power connectors.
13 Replace the two fuses removed in step 5.
14 Send defective cards for repair according to local procedure.
If fuses
do not blow
blow (protrude)
15 Go to the common returning a card procedure in this document.
Go to step 17.
16 For additional help with this card replacement, contact the next level of
support.
17 This procedure is complete. Return to the maintenance procedure that
directed you to this card replacement procedure.
DMS-100 Family Remote Switching Center Multi-Access Maintenance Manual XPM11 and up
RSC-M card replacement procedures
NTRX54BA
o
o
o
o
Access
Plate
in an RSC-M/MSP
Do
step 15
step 16
6-131
NTRX54
(end)