Nortel DMS 100 Series Maintenance Manual page 185

and press the Enter key.
If the LOADPM command
passes
fails
19 To return the inactive unit to service, type:
>RTS
and press the Enter key.
If the RTS command
passed
failed
20 Remove the sign from the active unit.
21 Go to the common returning a card procedure in this document.
22 This procedure is complete.
23 For additional help contact the next level of support.
24 For additional help with the SWACT, contact the next level of support.
Note: The system can recommend the of use the SWACT command with
the FORCE option. When this condition occurs, contact office personnel
to determine if the use of the FORCE option is acceptable.
DMS-100 Family Remote Switching Center Multi-Access Maintenance Manual XPM11 and up
INACTIVE
RSC-M card replacement procedures
in an RSC-M
Do
step 19
step 23
Do
step 20
step 23
6-33
NTMX72
(end)