Ntmx72 In An Rsc-M - Nortel DMS 100 Series Maintenance Manual

6-26 RSC-M card replacement procedures
NTMX72
in an RSC-M
Application
Use this procedure to replace an NTMX72 circuit card in a Remote Switching
Center Multi-Access (RSC-M) main shelf.
Note: In the examples in this section RSC-M refers to RCO2. When
software outputs messages to the MAP terminal, the software does not
differentiate between the two types of RCO2.
PEC
NTMX72
Common procedures
This section refers to the following common procedures:
•
•
Action
This procedure contains a summary flowchart and a list of steps. Use the
flowchart to review the procedure. Follow the steps to perform the procedure.
297-8223-550 Standard 04.02 November 2000
Suffixes
AA, AB
replacing a card
returning a card
Name
Power converter