Ntmx77 In An Rsc-M - Nortel DMS 100 Series Maintenance Manual

6-64 RSC-M card replacement procedures
NTMX77
in an RSC-M
Application
Use this procedure to replace an NTMX77 circuit card in a Remote Switching
Center Multi-access (RSC-M) main shelf.
Note: In this section, RSC-M is known as RCO2 in the examples. When
software outputs messages to the MAP terminal, software does not differ
between the two RCO2 types.
PEC
NTMX77
Common procedures
Two common procedures are referenced in this section:
•
•
Action
This procedure is the procedure to replace the card. This procedure contains a
summary flowchart and a list of steps. Use the flowchart to review the
procedure. Follow the steps to perform the procedure.
297-8223-550 Standard 04.02 November 2000
Suffixes
AA
"Replacing a card"
"Returning a card"
Name
Unified Processor card