Nortel DMS 100 Series Maintenance Manual page 258

6-106 RSC-M card replacement procedures
NTRX42
in an RSC-M/MSP
angles. You can require the use of these angles because of limited access to
the connectors.
Connector removal tool
This procedure contains a summary flowchart and a list of steps. Use the
flowchart to review the procedure. Follow the steps to perform the procedure.
The detailed procedure depends on which circuit cards the breaker module
circuit card (NTRX42) serves. Instructions will direct you to the correct steps
that depend on your configuration.
297-8223-550 Standard 04.02 November 2000
(continued)
PO746192
FW-31325