Nortel DMS 100 Series Maintenance Manual page 141

22 To busy the inactive RCO2 unit, type
>BSY UNIT unit_no
and press the Enter key.
where
To perform an out-of-service (OOS) test on the inactive RCO2 unit, type
23
>TST UNIT unit_no
and press the Enter key.
where
If TST
passes
fails
24 To return the inactive RCO2 unit to service, type
>RTS UNIT unit_no
and press the Enter key.
where
If RTS
passes
fails
25 Check the card listing that appears in the following MAP display.
Sample response on the MAP display:
SITE
RSCS0
RSCS0
RSCS0
RSCS0
RSCS0
If all cards on the list
are replaced
DMS-100 Family Remote Switching Center Multi-Access Maintenance Manual XPM11 and up
unit_no
is the number of the inactive RCO2 unit
unit_no
is the number of the RCO2 unit busied in step 22
unit_no
is the number of the RCO2 unit tested in step 23
FLR RPOS BAY_ID
01 A00 RSCM
01 A00 RSCM
01 A00 RSCM
01 A00 RSCM
01 A00 RSCM
RSC-M alarm clearing procedures
PM RSC-M/RCO2
Do
step 24
step 25
Do
step 30
step 29
SHF DESCRIPTION
00 32 RCO2 : 000
00 32 RCO2 : 000
00 32 RCO2 : 000
00 32 RCO2 : 000
00 32 RCO2 : 000
Do
step 26
5-31
Major
(continued)
SLOT EQPEC
: 03 MX77
: 08 MX76
: 11 MX73
: 15 MX74
: 17 MX73