Nortel DMS 100 Series Maintenance Manual page 222

6-70 RSC-M card replacement procedures
NTMX77
in an RSC-M
(end)
20
21
22
23
24
297-8223-550 Standard 04.02 November 2000
and press the Enter key.
If the RTS command
passed
failed
Remove the sign from the active unit.
Go to the common "Returning a card" procedure in this document.
This procedure is complete.
For additional help, contact the next level of support.
For additional help with switch of activity, contact the next level of support.
Note: If the system recommends the use of the SWACT command with
the FORCE option, consult office personnel. Office personnel can advise
you to not use the FORCE option.
Do
step 20
step 23