6-88 RSC-M card replacement procedures
NTMX87
in an RSC-M
Application
Use this procedure to replace an NTMX87 circuit card in a Remote Switching
Center Multi-access (RSC-M) main or extension (EXT) shelf.
Note: In this section this manual refers to RSC-M as RCO2 in the
examples. When software outputs messages to the MAP terminal, software
does not differentiate between the two types of RCO2.
PEC
NTMX87
Common procedures
The common returning a card procedure is referenced in this procedure.
Action
The following flowchart is a summary of the procedure. Use the instructions
in the step-action procedure that follows the flowchart to replace the card.
297-8223-550 Standard 04.02 November 2000
Suffixes
Name
AA
Quad Frame Carrier