Nortel DMS 100 Series Maintenance Manual page 263

RCO2 0
Please confirm ("YES", "Y", "NO", or "N"):
If the system
prompts you to confirm a warm
SWACT
rejects the SWACT
11 To confirm the command, type
>YES
and press the Enter key.
Example of a MAP response:
Unit0:
Unit1:
RCO2 0
If the MAP response
is SWACT passed
is other than listed here
At the MAP terminal
12 To manually busy (ManB) the inactive unit, type
>BSY UNIT INACTIVE
and press the Enter key.
Example of a MAP response:
RCO2
Unit0:
Unit1:
Bsy INACTIVE
RCO2 0 Unit 0
If the BSY command
passed
failed
DMS-100 Family Remote Switching Center Multi-Access Maintenance Manual XPM11 and up
RSC-M card replacement procedures
A Warm SwAct will be performed after
data sync of active terminals.
Inact SysB Mtce
Act ISTb
SwAct Passed
0 ISTb Links_OOS: CSide
Inact ManB
Act ISTb
Bsy Passed
in an RSC-M/MSP
Do
step 11
step 32
Do
step 12
step 31
0 , PSide
Do
step 13
step 31
6-111
NTRX42
(continued)
1