Nortel DMS 100 Series Maintenance Manual page 244

6-92 RSC-M card replacement procedures
NTMX87
in an RSC-M
(continued)
6
RCO2 P-side link connections (Sheet 1 of 2)
Card Location
RCO2 main, shelf,
pos. 05
Left ext. half shelf
297-8223-550 Standard 04.02 November 2000
If C-side links are
not defective
To display the peripheral-side (P-side) links associated with the NTMX87
circuit card, type
>TRNSL P
and press the Enter key.
Example of a MAP response
Link 0: REM1 11 0
Link 1: Carrier of Class – Trunk ;Status:OK
Link 2: Carrier of Class – Trunk ;Status:SBsy
Link 3: Carrier of Class – Trunk ;Status:SBsy
Link 4: Carrier of Class – Trunk ;Status:SBsy
Link 5: Carrier of Class – Trunk ;Status:OK
Link 6: Carrier of Class – Trunk ;Status:OK
Link 7: Carrier of Class – Trunk ;Status:OK
Link 8: REM1 11 1 0;Cap MS;Status:OK;
The following table shows the P-side link configuration for an RSC-M cabinet.
The cabinet has three RCO2 main shelves and two extension half shelves.
Note 1: A RCO2 cabinet can include other configurations like two RCO2
main shelves and four extension half shelves. Consult office
administration or review office records for P-side link configurations other
than the configurations mentioned in the following table.
Note 2: If the RCO2 has an associated extension half shelf, consult office
administration or review office records for the P-side link configuration.
Note 3: NTMX82 packlets number from 0 to 3 starting at the top of each
NTMX87 circuit card.
Links for
MX87 MX82
Slot No. Card 0
12 0, 1
16 8, 9
14 16, 17
4 24, 25
6 32, 33
Do
step 6
0;Cap MS;Status:OK
Links for Links for
MX82 MX82
Card 1 Card 2
2, 3 4, 5
10, 11 12, 13
18, 19 20, 21
26, 27 28, 29
34, 35 36, 37
;MsgCond:OPN
MsgCond:OPN
Links for
MX82
Card 3
6, 7
14, 15
22, 23
30, 31
38, 39